Guition · ESP32-S3 · 7.0" · 800×480
Guition ESP32-S3 HMI Display 7.0" (8048S070 based) specifications
The Guition ESP32-S3 HMI Display 7.0" (8048S070 based) is a 7.0" 800×480 display board by Guition, built around the ESP32-S3 (ESP32-S3-WROOM-1 module) running at 240 MHz. The panel uses a EK9716 / ST7262 (RGB Parallel) controller over RGB565 Parallel (DPI), with GT911 (I2C, addr: 0x5D) touch input. Memory: 16 MB flash, 8 MB PSRAM; wireless: Wi-Fi and Bluetooth. LCD Ultra Pro supports it with a ready-made LVGL 8.4 display driver, so you can design its UI visually and export a complete Arduino project.
- Screen
- 7.0" · 800×480
- Chip
- ESP32-S3
- Memory
- 16 MB flash, 8 MB PSRAM
- Input
- capacitive touch
Specifications
| Manufacturer | Guition |
|---|---|
| Screen size | 7.0" |
| Resolution | 800×480 px |
| Colour depth | 16-bit |
| Display controller | EK9716 / ST7262 (RGB Parallel) |
| Display interface | RGB565 Parallel (DPI) |
| Touch | GT911 (I2C, addr: 0x5D) |
| Microcontroller | ESP32-S3 |
| Module | ESP32-S3-WROOM-1 |
| CPU clock | 240 MHz |
| Internal SRAM | 512 KB |
| PSRAM | 8 MB |
| Flash | 16 MB |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Hardware variant | Capacitive version (GT911 touch) — same base hardware as the Sunton ESP32-8048S070C. |
Free GPIOs and connectors
These GPIOs are not used by the display, touch or on-board peripherals, so you can wire your own sensors, buttons or relays to them.
| Pin | Capabilities | Note |
|---|---|---|
| GPIO 0 | GPIO, BOOT | Boot button / IO0 |
| GPIO 17 | GPIO, PWM | Presumably free |
| GPIO 18 | GPIO, PWM | GT911 INT is often left unconnected, presumably free |
| GPIO 43/TX | GPIO, UART_TX | UART0 TX |
| GPIO 44/RX | GPIO, UART_RX | UART0 RX |
LVGL support in LCD Ultra Pro
| Driver status | Matched to the manufacturer’s official demo, compile-tested |
|---|---|
| Arduino export | Complete LVGL 8.4 project with the display driver |
| USB Live preview | No |
| Orientations | 0° |
| Brightness control | Hardware backlight dimming |
Pick this board in the editor and the canvas matches its exact resolution and shape. Build the interface with widgets, add events without code, try it in Live Preview, then export it as a ready-to-compile Arduino project. See the documentation for the workflow.
Frequently asked questions
What is the resolution of the Guition ESP32-S3 HMI Display 7.0" (8048S070 based)?
800×480 pixels on a 7.0" screen, driven at 16-bit colour depth.
Which display controller and interface does it use?
EK9716 / ST7262 (RGB Parallel) over RGB565 Parallel (DPI).
Does the Guition ESP32-S3 HMI Display 7.0" (8048S070 based) have a touchscreen?
Yes — GT911 (I2C, addr: 0x5D).
Which ESP32 chip and how much memory does it have?
ESP32-S3 (ESP32-S3-WROOM-1) at 240 MHz, 16 MB flash, 8 MB PSRAM.
Which GPIOs are free for my own sensors or relays?
5 GPIOs are free: GPIO 0, GPIO 17, GPIO 18, GPIO 43/TX, GPIO 44/RX.
Can I use LVGL on the Guition ESP32-S3 HMI Display 7.0" (8048S070 based)?
Yes. LCD Ultra Pro has a ready-made LVGL 8.4 display driver for this board (Matched to the manufacturer’s official demo, compile-tested). Design the UI in the browser and export a ready-to-compile Arduino project.
Last updated: